Polyester Shell Red Suede Faux Leather Jacket Ladies Womens Casual Wear
|Lining:||DTM 210T||Trim Color:||Soft Gold|
ladies pleather jacket,
female leather jacket
Ladies' zip through mandarin collar stone pleather biker jacket with multi topstitching TW77310
|100%PU/Polyurethane with 100%viscose base, 310-330gsm|
|CF, side pocket||3||#5||soft gold|
|CF, side pocket||3||soft gold|
|LSW hem||1||3x1cm||soft gold|
- Neckline to be mandarin neckline with 5cm extension tab and soft gold branded popper button closure.
- Mandarin neckline to have seven top stitch lines 5mm apart.
- Style to have three curved top stitch lines on the upper bodice, following the curve of the neckline running into the opening of the pleather jacket.
- Top stitching to be 5mm apart.
- Pleather to have cutline mimicking top stitching as per image.
- Cutline to have a topstitch foot stitching.
- Pleather to have a princess seam and a armhole princess seam on both sides.
- Both princess seams to have three top stitching as per image.
- Pleather to have bottom slanted zip pockets in 13.5cm x 1.8cm with exposed zip tape and branded puller.
- Zips to be slanted inward, zip to be soft gold.
- CF zip detail with edge stitching, exposed zip to be #5 gunmetal and DTM zip tape with branded puller.
- Sleeve to be two piece
- Sleeves to have two cutlines.
- Cutlines to have three top stitching as per image.
- First cutline to be in the middle of the sleeve and second at the beginning of the cuff.
- Sleeves cuff with ten top stitching lines 1.5cm apart - Refer to overseas sample.
- These style line to only be on the front.
- Follow hem as per image.
- Hem closer to zip to have three lines of top stitching running perpendicular into the hem.
- Top stitching to be 5mm apart.
- Cutline to run perpendicular to the edge of the pleather.
- 7cm away from zip; to have a hem band of 9cm.
- Hem band to have six top stitching lines 1.5cm apart.
- Pleather to have two back darts.
- Center back cutline, CB cutline to have three top stitching.
- Back to have two princess cutlines from the armhole seam.
- Both princess seams to have three top stitching.
- Back sleeve cutline to have three top stitching as per overseas sample.
- Hem detailing to start 10cm from side seam.
- Hem detail to be as per front. Hem panel to be 8.5cm long with six top stitching lines.
To be fully lined DTM 210T superfine lining.
Hanger loop with shell fabric.
self fabric back neck patch in the inside with labels
DANIEL HECHTER branded trims
All metal hardware to be branded and soft gold color.
All stitching must be DTM and thicker thread.
|Collar Depth at C/Back Neck||0/0||3.5||3.5||3.5||3.5||3.5||3.5||3.5||3.5||3.5|
|Across Back Neck (HSP to HSP)||5/5||16.8||17.2||17.6||18||18.6||19.2||19.8||20.4||21|
|Across Back Mid-Armhole or Yoke||10/10||34||35||36||37||38.2||39.4||41.4||43.9||46.4|
|Across Front Mid-Armhole or Yoke||10/10||32||33||34||35||36.2||37.4||39.4||41.9||44.4|
|Half Bust at Underarm||10/10||42||44||46||48||50.5||53||56.5||61||66|
|Half Waist (41cm down)||10/10||35||37||39||41||43.5||46||49.5||54||59|
|Half Hem Width - Straight Across||10/10||43||45||47||49||51.5||54||57.5||62||67|
|Long Sleeve Length (including Cuff)||5/5||60.8||61.2||61.6||62||62.6||63.2||63.8||63.8||63.8|
|Half Armhole (Diagonal)||5/5||18||19||20||21||22||23||24||25.4||26.8|
|Front Length (from HSP)||5/5||59||60||61||62||63||64||65||67||69|
|Pocket Mouth Opening||5/5||14||14||14||14||14||14||15||15||15|
|Half Cuff Width (Long)||5/5||11||11.5||11.5||12||12.5||12.5||13||13.5||13.5|
|Half Bicep at Underarm||5/5||14.5||15.5||16.5||17.5||18.5||19.5||20.5||21.9||23.3|