Red Ladies Wool Coat , Melton Trench Coat With Self Fabric Belt / Contrast Plastic Button

Product Details:
Place of Origin: China
Brand Name: Ginger Mary
Model Number: 30 32 34 36 38 40 42 44
Payment & Shipping Terms:
Minimum Order Quantity: 1000units
Delivery Time: 10-15days after pp approval

Detail Information

Material: Melton Composition: 100%polyester
Color: Red Lining: 100%polyester 210T
Button: Plastic Button
High Light:

melton trench coat

,

ladies single breasted coat

Product Description

Ladies' red melton trench coat with self fabric belt and contrast black plastic button TW56061

 

 

Shell fabric

 

100%Polyester melton

 

Lining

 

100%Polyester 210T

 

Trim list

 

Trim 

 

Position Quantity Size   Color

 

plastic button

 

placket, shoulder 14  28mm black   

 

popper

 

flap, belt loop, pocket 9 15mm polished gunmetal

 

buckle

 

belt 1 6.5x4cm    polished gunmetal

 

buckle

 

cuff 2 5x3.5cm polished gunmetal

 

eyelets

 

belt, cuff 11 10mm polished gunmetal

 

Description

Collar:
- Full Collar stand
- Shirt Collar with twin needle stitch
- Button and button hole on corner of collar and to go through double breast detail
- Buttons on the collar to be x 2 first buttons of Double Breast
Shoulder:
- Tab on Shoulder to be on center of shoulder seam.
- Tab to be thread through the loop and fastened with a button.
- Tab to have twin needle stich.
Front:
- Double breast buttons down CF (x6 on each side - total of 12 buttons on the CF)
- Yoke seam on front panel (5cm down from shoulder seam) with edge stitch
- Storm flap to have twin needle stich on edge of flap and must be fastened with a squared off 15mm stud to the front panel
- Storm flaps to be stitched into yoke seam and armhole.
- Princess cutline from yoke seam to hem with twin needle stitch on panel seam
- x2 belt loops in the waist position, at the side seam side of the princess cutline.
- Belt loops to have twin needle stitching around the edges and the belt loop must be 4cm wide at the top of the belt loop where
it is stitched down, 6cm at the widest point and 10cm long down the center.
- Belt loop to gradually go wider to the bottom of the belt loop and to end in a point.
- 15mm squared off stud (polished) on the point of the belt loop to fasten this to the front panel.
- Thread through belt with polished metal buckle and pong to be at the end of one side of belt and belt to be finished off on the
other side with a point and polished metal eyelets for belt fastening. Belt must have twin needle stitch on both sides of the belt.
- Functional Side entry pockets with pocket flap to be 4.5 in width and 16cm in length with twin needle stitched around pocket
entry.
- Pocket to be fastened/ closed with a 15mm squared off stud on the center of the pocket flap.
- 2 Piece sleeve with twin needle stitching on panel lines
- 12cm deep cuff with twin needle stitching on panel line

Sleeve:
- Tab on sleeve with Polished Metal buckle, pong and eyelets. Tab to have twin needle stitch on both sides

- x4 loops on cuff for tab.

 

Back:
- Shirt Collar with twin needle stitch around back of collar edge
- Yoke seam on back panel (5cm down from shoulder seam) with edge stitch
- Storm flap on back to be stitched into yoke seam and armhole.
- Storm flap to be curved (shorter at side seams than at CB)
- Storm flap to have twin needle stich on edge of flap and must be fastened with a squared off 15mm stud to the back panel
- Princess cutline from yoke seam to hem with twin needle stitch on panel seam
- x2 belt loops in the waist position, at the side seam side of the princess cutline.
- Belt loops to have twin needle stitching around the edges and the belt loop must be 4cm wide at the top of the belt loop where it is stitched down, 6cm at the widest point and 10cm long down the center. Belt loop to gradually go wider to the bottom of the belt loop and to end in a point.
- 15mm squared off stud (polished) on the point of the belt loop to fasten this to the front panel.
- 2 Piece sleeve with twin needle stitching on panel lines
- 12cm deep cuff with twin needle stitching on panel line
- Tab on sleeve with Polished Metal buckle, pong and eyelets. Tab to have twin needle stitch on both sides
- x4 loops on cuff for tab.
- CB 18cm Vent (tacked closed)

 

Measurement

MEASUREMENTS Tolerances 28 30 32 34 36 38 40 42 44
Collar Leading Edge 0/0 10 10 10 10 10 10 10 10 10
Collar Depth at C/Back Neck 0/0 11 11 11 11 11 11 11 11 11
Across Back Neck (HSP to HSP) 5/5 19.8 20.2 20.6 21 21.6 22.2 22.8 23.4 24
Across Back Mid-Armhole or Yoke 10/10 36.5 37.5 38.5 39.5 40.7 41.9 43.9 46.4 48.9
Across Front Mid-Armhole or Yoke 10/10 33 34 35 36 37.2 38.4 40.4 42.9 45.4
Half Bust at Underarm 10/10 42 44 46 48 50.5 53 56.5 61 66
Half Waist (41cm down) 10/10 37 39 41 43 45.5 48 51.5 56 61
Half Bottom Hip 10/10 48 50 52 54 56.5 59 62.5 67 72
Half Hem Width - Straight Across 10/10 61 63 65 67 69.5 72 75.5 80 85
Shoulder Seam 5/5 11.1 11.4 11.7 12 12.3 12.6 12.9 13.4 13.9
Long Sleeve Length (including Cuff) 5/5 60.8 61.2 61.6 62 62.6 63.2 63.8 63.8 63.8
Half Armhole (Diagonal) 5/5 19 20 21 22 23 24 25 26.4 27.8
Half Bicep at Underarm 5/5 15 16 17 18 19 20 21 22.4 23.8
Half Cuff Width (Long) 5/5 12.5 13 13 13.5 14 14 14.5 15 15
Cuff Depth 0/0 13 13 13 13 13 13 13 13 13
Front Length from HSP 10/10 97 98 99 100 101 102 103 105 107
C/Back Length from Neck Seam 10/10 96 97 98 99 100 101 102 103 104.5
Belts spacing of holes 0/0 3 3 3 3 3 3 3 3 3
Belts number of holes 0/0 5 5 5 5 5 5 5 5 5
Belts first hole to tip of belt 0/0 9 9 9 9 9 9 9 9 9

 

Specification

 

1,High fashion,good quality, reasonable price,comfortble feeling and cost-effective.
 
2,Material : varous material,according to your requirements.
 
3,Color : according to your requirements.
 
4,Size : XS,S,M,L,XL,XXL,according to your requirements.
 
5,MOQ : 1000 pieces per style,Please give your order quantity,mix order also available.
 
6,Price : FOB Price depends on your order quantity.

 

 

Get in touch with us

Enter Your Message

You Might Be Into These