Garment Dyed Mens Black Quilted Jacket , Mottle Wash Pleather Jacket Mens
|Lining:||210T DTM||Trim Color:||Antique Nickel|
mens polyurethane jacket,
mens pu coat
Menswear metal zip through navy upstyled pleather biker jacket with suede detail TW75530
|100%PU/Polyurethane 100%viscose base, 310-330gsm|
|CF+chest pocket||3||#5||antique nickel|
|CF+chest pocket||3||antique nickel|
- collar to be funnel neck, 4cm wide with a 2cm wide DTM navy suede strip through the center.
- collar to have a single gun metal popper button closure at CF - branded.
- shoulder panel to have vertical stitch detail, 2cm apart using thicker top stitch thread.
- front shoulder to have a filled piping insert in body fabric.
- front body to have a zip closure in antique nickel zip with STUDIO branded gun metal zip puller. #5 zip to be used.
- zip to be concealed.
- front chest to have a diagonal cutline from mid arm hole to CF zip, finished with a twin needle stitch.
- front chest to have a 2cm wide DTM navy suede strip placed below chest cutline as per CAD.
- front chest zips to be placed in the same diagonal line as the chest cutline, #5 CF zip to be used.
- front chest zips to have a gun metal unbranded rivet on the outer edge of the zip.
- front chest - below zips - to have a laid on suedette strip running from the lower armhole towards the CF zip and curving down toward the bottom hem - as per CAD.
- front sides to have princess cutlines, finished with a twin needle stitch.
- side panels to be in DTM Navy pin punch PU.
- princess cut lines to have welt pockets inserted into the cutline - welt pocket to be curved on the edge as per CAD.
- welt to be in DTM navy suede.
- front body at waist line to have a cutline with filled piping inserted, starting at side seam and running towards the CF zip and then curving down towards the bottom welt, finished with an edge stitch. filled piping to be in navy suede.
- bottom welt to be 6cm wide, finished with a twin needle stitch on the top edge and a foot stitch on the bottom edge.
- top of sleeve to have stitch detail (2cm apart) and should run down to mid bicep.
- stitch detail on top of sleeve to have piping detail around the edge
- front of sleeve to have a 2cm wide suede strip from mid armhole to cuff.
- 2 piece long sleeve with 6cm wide cuff.
- cuff to be finished with a twin needle stitch on the top edge and a foot stitch on the bottom edge.
- back shoulder to have stitch detail as per CAD, with a filled piping inserted into the back edge of the shoulder panel
- back yoke to be in pin punch fabric.
- back yoke seam to have 2 rows of suede strips as per CAD (2cm wide each) - please align these strips with the front suede strips on the chest.
- back to have a vertical cutline seam, running from the back yoke down to the bottom hem, finished with a twin needle stitch.
- back princess cut lines, finished with a foot stitch as per CAD.
- back of sleeve to have a 2cm wide suede strip running from mid armhole to cuff.
- sleeve cuff at back to have #3 gun metal zips with gusset detail.
- inside body lining to be in navy and white printed dot lining .
- inside piping to be in white piping.
- Inside LHSW to have a welt pocket in body fabric.
|Collar Depth @ Centreback Neck||0/0||4||4||4||4||4||4||4||4|
|Collar Leading Edge||0/0||4||4||4||4||4||4||4||4|
|Collar measurement at top edge||10/5||39||40||41||43||45||47||49||51|
|Collar measurement along neck seam||10/5||41||42||43||45||47||49||51||53|
|Across Back Neck (HSP to HSP)||5/5||16.6||17||17.4||18.2||19||19.8||20.6||21.4|
|Neck Drop (seam to seam)||5/5||7.3||7.3||7.7||8.1||8.5||8.9||9.3||9.7|
|Across Front Mid-Armhole or Yoke||10/10||33.4||34.5||35.6||37.8||40||42.6||45.2||47.8|
|Across Back Mid-Armhole or Yoke||10/10||38.4||39.5||40.6||42.8||45||47.6||50.2||52.8|
|Half Chest at Underarm||10/10||43||45||47||51||55||61||67||73|
|Half Hem Width - Straight Across||10/10||40||42||44||48||52||58||64||70|
|Shoulder Seam ex Neck Trim||5/5||12.6||13||13.4||14.2||15||15.8||16.6||17.4|
|Sleeve Length (including Cuff)||10/10||66||66.5||67||67.5||68||68.5||69||69.5|
|Half Armhole (Diagonal)||5/5||22||22.5||23||24||25||26.5||28||29.5|
|Half Bicep at Underarm Pt||5/5||17.5||18||18.5||19.5||20.5||22||23.5||25|
|Half Cuff Width||5/5||11||11.5||12||12.5||13||14||15||16|
|C/Back Length from Neck Seam||10/15||63||64||65||67||69||71||73||75|